Advanced model LGXS | Industrial Robots- Industrial Automation- Industrial Support

Feature
Specification

Advanced model LGXS

High Precision Accuracy grades C5, High Durability , Clean specification as a standard feature. Higher efficiency, accuracy, and reliability from ground ball screw. Ideal for base axis of multi-axis configuration.

Maximum payload： 2kg to 160kg
Maximum speed： 300 to 2,400mm/sec
Stroke： 50 to 1,450mm

Feature

01 Shortest Overall Length

The industry’ s shortest class is achieved for the total length in relation to the effective stroke.

02 High Precision

Adopted ground ball screws Ball screw Remove Accuracy:
Accuracy class C5

Positioning Remove Accuracy repeatability: +/-5 μm

03 Cleanroom Ready Design

Protective stainless dust shield
Ports are ready for vacuum fittings

04 Motor orientation is changeable with optional conversion unit

Motor unit of standard straight type can be used for side-mount setup.

Various data

Robonity Catalog PDF (4.5MB)

Model	Adaptable motor （W）	Repeatability （±mm）^{Note 1}	Deceleration mechanism	Stroke （mm）	Maximum speed (or equivalent) ^{Note 2} (mm/sec)	Ball screw lead （mm）	Maximum payload (or equivalent) ^{Note 3} （kg）		Rated thrust (or equivalent) ^{Note 3} （N）	Maximum dimensions of cross section of main unit（mm）	Overall length （mm）	Degree of cleanliness^{Note 4}	Intake air^{Note 5} （Nℓ/min）	Using ambient temperature and humidity
Model	Adaptable motor （W）	Repeatability （±mm）^{Note 1}	Deceleration mechanism	Stroke （mm）	Maximum speed (or equivalent) ^{Note 2} (mm/sec)	Ball screw lead （mm）	Horizontal	Vertical	Rated thrust (or equivalent) ^{Note 3} （N）	Maximum dimensions of cross section of main unit（mm）	Overall length （mm）	Degree of cleanliness^{Note 4}	Intake air^{Note 5} （Nℓ/min）	Using ambient temperature and humidity
LGXS05	50	±0.005	Ground ball screw φ12 (C5 class)	50 to 800 (50 mm pitch)	1333 666 333	20 10 5	5 8 13	2 4 8	41 69 138	W 48 × H 65	ST+131.5	ISO CLASS 3 (ISO14644-1) or equivalent	30 to 100	0 to 40℃、 35 to 80%RH (non-condensing)
LGXS05L	100		Ground ball screw φ12 (C5 class)	50 to 800 (50 mm pitch)	1333 666 333	20 10 5	12 24 32	3 6 12	84 169 339	W 48 × H 65	ST+161.5		30 to 100
LGXS07	100		Ground ball screw φ15 (C5 class)	50 to 1100 (50 mm pitch)	1800 1200 600 300	30 20 10 5	10 25 45 85	2 4 8 16	56 84 169 339	W 70 × H 76.5	ST+202		30 to 115
LGXS10	200			100 to 1250 (50 mm pitch)	1800 1200 600 300	30 20 10 5	25 40 80 100	4 8 20 30	113 170 341 683	W 100 × H 99.5	ST+175.5		30 to 90
LGXS12	400			100 to 1250 (50 mm pitch)	1800 1200 600 300	30 20 10 5	35 50 95 115	8 15 25 45	225 339 678 1360	W 125 × H 101	ST+211.5
LGXS16	750		Ground ball screw φ20 (C5 class)	100 to 1450 (50 mm pitch)	2400 1200 600	40 20 10	45 95 130	12 28 55	320 640 1280	W 160 × H 130	ST+242.5
LGXS20	750		Ground ball screw φ20 (C5 class)	100 to 1450 (50 mm pitch)	2400 1200 600	40 20 10	65 130 160	15 35 65	320 640 1280	W 200 × H 140	ST+288.5

Note1. Positioning repeatability in one direction.

Note2. When a moving distance is short and depending on an operation condition

Note3. The rated thrust and maximum transferable weight are values assuming the attached motor outputs the rated torque.

Note4. When using in a clean environment, attach a suction air joint. The degree of cleanliness is the cleanliness level achieved when using at 1000 mm/sec or less.

Note5. The required suction amount will vary according to the operating conditions and operating environment.