Basic model LBAS High Rigidity・Compact・Low Cost
High Rigidity, Compact, Low Cost. Designed to accommodate motors from most leading manufacturers. Newly designed integrated guide rail/frame structure. Improved moment load capacity in compact frame size. Designed to accommodate motors from most leading manufacturers.
Feature
01 High Rigidity
Moment rigidity is increased approximately three times from current models.
02 High Precision
Straightness (running parallelism):+/-0.02/800 mm
03 Compact
Frame width is reduced by approximately 20% from current models
04 Motor attaching direction, Easily changeable with the special bending part
05 Installation process is simple and easy
1.Mounting holes are accessible from top or bottom without disassembling actuator unit.
2.Standard surface on the side and dowel pin holes on the bottom.
06 Easy Maintenance
Moving parts can be lubricated from outside without opening actuator
Feature
| Model | Adaptable motor （W） |
Repeatability （±mm）Note 1 |
Deceleration mechanism |
Stroke （mm） |
Maximum speed (or equivalent) Note 2 （mm/sec） |
Ball screw lead （mm） |
Maximum payload (or equivalent) Note 3 （kg） |
Rated thrust (or equivalent) Note 3 （N） |
Maximum dimensions of cross section of main unit（mm） | Overall length （mm） |
Using ambient temperature and humidity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Horizontal | Vertical | |||||||||||
| LBAS04 | 50 | ±0.01 | Shifting position ball screw φ10 (C7 class) |
50～800 (50 mm pitch) |
800 400 |
12 6 |
12 20 |
2 5 |
71 141 |
Ｗ44 × H 52 |
ST+214 | 0 to 40°C, 35 to 80%RH (non-condensing) |
| LBAS05 | 100 | Shifting position ball screw φ12 (C7 class) |
1333 666 333 133 |
20 10 5 2 |
12 24 40 45 |
3 6 12 15 |
84 169 339 854 |
W 54 × H 60 |
ST+220.5 | |||
| LBAS08 | 200 | Shifting position ball screw φ16 (C7 class) |
50～1100 (50 mm pitch) |
1200 600 300 |
20 10 5 |
40 80 100 |
8 20 30 |
174 341 683 |
W 82 × H 78 |
ST+278 | ||
Note1. Positioning repeatability in one direction.
Note2. When a moving distance is short and depending on an operation condition, it may not reach the maximum speed.
Note3. The rated thrust and maximum transferable weight are values assuming the attached motor outputs the rated torque.
